EFC031E - IFC130
First issue 02 / 06
9
3 - SOUND
- The items of the SOUND menu are not used
4 - MISCELLANEOUS
- EFC031E
4.1 Reset the values to ROM default
- Reset all the EEPROM data to FF.
Only required if the EEPROM data are corrupted.
After ”reset the values to ROM default” the alignment, calibration and channel installation is necessary.
4.2 LUMA_TEMPORAL_NR
- Temporal noise reduction setting for luminance.
Factory adjusted. It is not necessary to do adjustment on this item.
4.3 CHROMA_TEMPORAL_NR
- Temporal noise reduction setting for chrominance.
Factory adjusted. It is not necessary to do adjustment on this item.
4.4 Calibration
See § 1.4
4.5 Debug
- Bus quiet mode for main I2C Bus. Used only in development purpose.
4.6 Reset the Alignment values
- Reset all alignment values to default value. Used only if the TV need new alignment.
In that case it is necessary to start alignments by Video Calibration (ADC YPbPr).
Note:
After loading of a new software select ” Reset the alignment values” and check the TV alignment.
4.7 TT 27Y24 Packet Enable
According to software version. Factory adjust.
Improve teletext performance for some special French channels
(
Factory Misc
(Reset the values to ROM default Yes?
LUMA_TEMPORAL-NR
CHROMA_TEMPORAL-NR
Calibration ...
Debug ...
Reset the Alignment values Yes?
TT 27Y24 Packet Enable*
Factory setting
EFC031_X181-0
Return
Sound
Video
Field Service
* According software version
...
...
...
...
Miscellaneous
...