11
H
ard
w
are S
ett
in
g
2
Hardware Setting
Setting the Main Board
Before board setting, be sure that your work area is dust-free and dry. Prepare a Phillips
screwdriver and an empty box for removed screws in advance.
Also, be sure that your PC is turned off and that the cables (including power) are
removed from the PC.
* The product components vary depending on the product of your purchase.
POINT
See the instruction manual for your PC (motherboard) for the PCI slot (PCI
Express slot) type.
<EDIUS NX PCI-X>
Set the main board (NHX-E1) in the normal PCI slot (64bit / 66MHz PCI).
32bit / 33MHz PCI can be used when you edit only SD format videos.
<EDIUS NX PCI-e / EDIUS NX Express>
Set the main board (NHX-E2) in the PCI Express slot (PCI Express x1).
When PCI Express x1 is not available, either PCI Express x4 or x8 can
be used.
<HDSTORM>
Set the main board (HQX-E1) in the PCI Express slot (PCI Express x1).
When PCI Express x1 is not available, either PCI Express x4 or x8 can
be used.
•
•
•
•
•
•
1
Tightly set the main board in PCI (PCI Express) slot.
Main board
POINT
The main board should fit in the PCI slot (PCI Express slot) without
using any force. If the board cannot be inserted fully, please do not force
in or bend any parts of the board.
•
