EAP 300 REMOTE ANNUNCIATOR
PM084 REV 0 08/06/20 THOMSON TECHNOLOGY
2
2. DESCRIPTION
The annunciator panel (EAP 300) which can be connected to the MEC 310 via a CANbus
communication line. The EAP 300 has 16 configurable LEDs and 8 configurable buttons, which are
programmed with the TPS 300 PC utility software. It can be used as an interface to the MEC 310 for
indication of status and alarms together with buttons for e.g. remote alarm acknowledge and mode
selection.
Contents:
A DC/DC converter for the EAP 300 DC supply voltage and cable with an RJ12 plug in one end and
stripped wires in the other end is included in the EAP 300 Kit.
NOTE:
A maximum of 2 EAP 300 units can be connected
to each MEC 310.
NOTE:
The maximum length of the CANbus line is 200m.
REAR VIEW
Connectors:
CAN 1:
DC supply (input) and CANbus communication to/from MEC 310 or other EAP 300
units.
CAN 2:
CANbus communication to/from other MEC 310 or EAP 300 units and status relay
output.
End resistor:
Dip switch for 120
Ω
end resistor for the CANbus communication.
Dip switch 2 is
not used
Torque:
4 lb-in
EAP 300
Summary of Contents for EAP 300
Page 2: ......
