2
General Information
2. Quick start: about connections and installation
2.1 Connections
Please follow figures 1 to 3 for a standard installation.
Note: Before plug in the receiver, you should connect at least the aerial antenna cable and the TV scart. Others connections
are optional.
Warning
If you are not sure how to connect your receiver, do not take the risk of doing it yourself. Ask your
dealer to do it for you. He is specially trained by our technicians and can get the best performance out
of your receiver.
Important: about DTI1004 connections
If you use an indoor antenna requiring a specific powering by RF cord, please switch the value to
ON
in the installation menu (see
Menu
/
Installation
/
Terminal
/
Antenna
) and then launch the channels
installation (see
Menu
/
Installation
/
Channels
).
If you use the RF modulator connection, please switch the value to
ON
in the installation menu (see
Menu
/
Installation
/
Terminal
/
Connection
) and then switch your TV on the channel 62.
Note that if the UHF Channel numbers of the receiver and the TV set are not set the same, no picture will be
displayed.
Disclaimer
Note that the availability of digital services in your particular location is dependent on the transmitter(s)
available to your receiving aerial and the configuration of your existing reception equipment. Please
check with your dealer or installer.
RF IN
RF OUT
Figure 1: DTI 652
Figure 2: DTI 1004
Figure 3: inserting
batteries
01_DTI652_1004_en.indd 2
01_DTI652_1004_en.indd 2
11/05/06 19:39:41
11/05/06 19:39:41
Summary of Contents for DTI 1004
Page 1: ...DTI series 652 1004 User manual ...
Page 2: ......
