9
EN
EN
Connections and initial set up
Adjusting the receiver / recorder configuration
1.
Switch on your TV set, your DVD recorder, then your satellite or cable receiver.
2.
Place the receiver on channel
002
.
With your DVD recorder’s remote control, carry out the following settings:
3.
If the main menu is not displayed, press the
MENU
key on the remote control.
4.
Select the
Setup
line using the
▲
or
▼
keys, and press
OK
to validate.
5.
Select the
Installation
line using the
▲
or
▼
keys, and press
OK
to validate.
The
Interactive setup
line is already selected. Press
OK
.
6.
Choose a display language for the following screens.
7.
Select your country of residence using the
▲
or
▼
keys, and press
OK
.
The
Automatic
line is already highlighted, press
OK
.
The screen which appears is a set-up screen for the allocation of input terminals
8.
If you connected your devices as indicated on page 8, check that
AV2-SAT-CABL
has been
allocated to
Satellite Receiver
, or
Cable Receiver
otherwise change the allocation using
the
B
key.
Note:
Cable Receiver
or
Satellite Receiver
: to
connect with a satellite or cable receiver terminal on the AV2
socket of your DVD recorder (connection shown on page 8).
The other settings are explained on page 6.
9.
Then select the line
Done
and press
OK
.
Note: an installation window will appear. A cursor shows the
progress in the set-up of the channels. When all the channels
that you can receive in your area have been stored,
100 %
is
indicated.
Press
OK
.
From now on, follow on-screen instructions appearing in the various windows. If need be,
refer to the additional explanations given below.
2_DTH8555 X_en.qxd 18/08/05 10:15 Page 9
