- EN 5 -
Get started
Power
CAUTION
•
Risk of product damager! Make sure that the power voltage
corresponds to the voltage printed on the back label.
•
Risk of electric shock! When you unplug the AC power cord
always pull the plug from the socket. Never pull the cord.
•
Before connecting the AC power cord, ensure you have
completed all other connections.
Place the unit in the desired position and unravel the mains cable. Insert the cable into the supply
socket and switch on if applicable.
Auto standby
When playing media from a connected device, the Tower automatically switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Setting Clock
After the unit is plugged into a mains supply or mains power failure, the display will show the “0:00” on
the LCD display. The unit should be in standby mode to set the current clock.
1. Press
TIME/ALARM
button, the digits for the display will blink.
2.
Press the
/
button repeatedly until correct hour is set. Press the
TIME/ALARM
to confirm
the hour setting.
3. The minute digits on the display will blink.
4. Press the / button repeatedly until correct minute is set. Press the
TIME/ALARM
to confirm
the minute setting.
Setting Alarm
This unit can be used as an alarm clock, CD/USB/FM is activated to play at a preset time.
1. Press
to switch the unit to standby mode.
2.
Make sure that you have set the clock correctly.
3. Press and hold
TIME/ALARM
button in shutdown state, the display will flash ON to select setting
alarm, and the display will blink.
4. Press the
TIME/ALARM
confirm, the time display will blink.
5. Press
/
button repeatedly to set hour. Press
TIME/ALARM
to confirm.
6. Press
/
to set minute.
7.
Press TIME/ALARM to confirm, and then press / to select CD/FM/USB status. Press
TIME/
ALARM
to confirm.
8. The volume would turn up from 0 to 20 gradually.
9. Press
TIME/ALARM
button in shutdown state, the display will flash ON to select setting alarm,
and the display will blink.
10.
Press the
/
to select OFF to cancel alarm.
Sleep Mode
Press and hold the
EQ/SLEEP
button, the display will blink. Press the button repeatedly until the
display shows the minute you want to set. You can set 10 to 90 minutes.
It blinks three times to confirm, and then return to the interface before. If you want to cancel the sleep
mode, press to OFF, after blanking three times, the sleep mode will cancel.
EQ Mode
Press the
EQ/SLEEP
button to switch between Rock,Pop,Classic,Jazz and Flat preset equalizer
modes.
Summary of Contents for DS205
Page 64: ...BBI_DS205_1606_Ver1...
