- EN 7 -
Manual Scan
1.
Press the [SOURCE] key on main unit to select “DAB MODE”.
2.
Press the [
] or [
] button to select “Manual tune”, press the [ENTER] button to enter
the service menu.
3. Press [
] or [
] to tune in the desired channel. The graph will indicate the signal
strength.
4. Press [MENU] or [
] to exit scan.
5.
If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
DRC(Dynamic Range Control)
Dynamic Range Control (also known as DRC) is a technology used to help make quieter sounds
easier to hear in a noisy environment.
1.
In DAB mode, press the [
] or [
] button to select “DRC”, press the [ENTER] button to
display “*” to the top right.
2.
Press MENU to confirm the setting. The display will return to normal.
DRC OFF - DRC is switched off, broadcast DRC will be ignored.
DRC LOW - DRC level is set to 1/2 that sent by broadcaster.
DRC HIGH - DRC level is used as sent by broadcaster.
Prune (To Remove Stations That are Listed But Unavailable)
In DAB mode, press [
] or [
] to display the “Prune” submenu, press ENTER button to
select the Prune option.
System (DAB)
In DAB mode, press
or
to show the “SYSTEM” submenu, press the ENTER button to go
to the system setting submenu.
1.
Language
Press [ENTER] to go to language selection; the default source language is English, the
selected language will have ”*” displayed at the top right.
Users may choose between “Deutsch”, “Italiano” and ”Français”.
2.
Factory Reset
Press [ENTER] to go to factory reset. If you wish to perform the reset operation, push the
or
until “YES” is highlighted on the display and press. A full reset of your radio will be
performed. All presets and station lists will be erased.
