Connections and Setup
5
EN
Connecting the aerial
The FM aerial (provided) should be connected to the FM aerial socket at the
back of the appliance.
Note: For FM reception, extend the aerial to its full length and install it so that you can
obtain the best possible reception.
Connecting the speakers
SPEAKERS 8
Ω
FR
FL
SR
SL
CEN
SUB
4
Ω
Six speakers are provided with the appliance (2 front, 1
centre, 2 rear, 1 subwoofer). In order to enjoy good
surround effects, all six speakers need to be connected to
the player.
One speaker wire is provided for each speaker
connection. Speaker wires are colour-coded to match the
colour-coded terminals.
Connect the speaker wire to the back of each speaker
and to the corresponding colour terminal at the back of
the appliance. Press down the tab to open the terminal
and insert the wire (1). Release the tab to lock the wire in
the terminal (2). Do the same for the centre speaker, rear
speakers and the subwoofer.
Note: When connecting the speakers, make sure the polarities
(“+” speaker wire to “+” on the player) of the speaker wires
and terminals match. If the wires are reversed, the sound will
be distorted and lack bass (“out of phase” effect). Do not
ground the output line, as this will damage the speaker.
(1)
(2)
DPL923_EN 14/01/05 12:04 Page 5
