EN
17
16
Advanced Sound Control
Stereo
The Stereo mode uses the two main channel outputs from
the front speakers and subwoofer channel.
Fine Setting of the Components
The receiver can be directly turned on by pressing the
SOURCE
buttons on the remote (like DVD/CD), which also
selects the best surround sound mode. The default surround
modes for different components are as below.
If you want to enjoy multi-channel sound from stereo
sources like CD, you can press
SURROUND
repeatedly to
toggle among the different surround modes and select the
one you want.
For Digital Signal (Dolby Digital)
Dolby Digital
Stereo
For DTS Signal
DTS
Stereo
For STEREO Signal
Stereo
Dolby PL II MOVIE
Dolby PL II MUSIC
Dolby
PL Stereo
Default Settings
The receiver will keep the last selection in memory as long
as it doesn’t enter standby mode.
DEFAULT INPUT (as seen on display)
Analog
Analog
Built-in
Built-in
SOURCE
AUX 1
AUX 2
TUNER
DVD/CD
Advanced Sound Control
Fine Setting of the Speakers
All the basic settings have already been presetted for the
speakers included in the box.
However, to make the surround sound more effective and
suit the acoustic conditions in your listening room, you may
need to delay the signal coming from some of the speak-
ers. Channel delay compensates for center or surround
speakers that are closer to the listening position than the
front speakers.
You may setup the speakers channel by channel: while in
stop mode, enter the setup menu, then choose SOUND for
speaker setup.
To change the speaker distance
In the DISTANCE menu, press
UP/DOWN
to select a speaker.
press
OK
to select the speaker channel which you want to
adjust, then press
UP/DOWN
to adjust the distance from
the front, rear and center speakers individually.
To test the speaker setting and change the speaker
level
In the TEST TONE menu, a short noise will come from each
speaker respectively, press
UP/DOWN
to configure the cur-
rently playing speaker.
Advanced Setting
Factory Default Setting
The receiver speaker distance default settings are the
following:
Front speakers (L/R)
4.5 m
Center speaker (Cch)
4.5 m
Rear speaker (SUR)
3 m
IMPORTANT NOTE
• Always use the subwoofer for optimum sound
quality.
0 dB
Front Left Gain Control
Note
:
AUX 1 and AUX 2 are just generic names.
You can connect other compatible audio
components to these inputs like TAPE,
MINI DISC, CD-RW player, etc.
DPL913VD-EN receiver 10/26/04 2:23 PM Page 20
