THOMSON DFT-6700, User Manual

Page: 13 / 37

DFT-6700 Battery Charger Users Manual
12
3.2.1 Charge cable connection
a) Connect the host side first, insert and tighten the black quick plug at the convex alignment charge tester black
quick connect socket notch, and the red quick plug at the raised alignment charge tester red quick connect
socket notch inserted and tightened;
b) Black charge cable large test clip connected to the battery string negative, red large test clip connected to the
battery string positive;
c) Now Can turn on the host power on;
Note:
a) If there is a spark found in the process of discharging the cable clip battery string electrode, please remove the
clip, stop the charge testing, and contact the THOMSON;
b) When wiring, first connect the DFT-6700 Tester and then connect the battery, and first remove the clip at the
battery end when disconnecting the wire;
c) When the coupling connector is connected to the quick connecting socket, it needs to be rotated and tightened
clockwise to prevent falling off! Rotate counterclockwise to remove at the end of charge.
d)
It is forbidden to only operate the Air (Control) Switch on the back of the tester for stopping discharging,
please disconnect the open circuit by removing the charge cable clip!