Cable Modem User’s Manual
Installation Procedure for USB Interface
Follow the steps below for proper installation
:
1.
Connect a coaxial cable (supplied by the local Cable Television Company) to the CABLE connector on the
modem.
Note: To speed up the registration process of cable modem, the coaxial cable should be
connected to the modem prior to the power connector.
2.
Connect the USB cable to the
USB
connector on the modem.
3.
Plug the power adapter into the
POWER
connector of the modem.
4.
Plug the other end of the power adapter into a power outlet.
5.
The cable modem will look for the proper cable modem signal in the Cable Television network and process the
initial registration. The cable modem is ready for data transfer after the LED “
CABLE
” is in solid green.
Note: The RST button at the rear panel is for maintenance purpose only.
Connecting the Cable Modem to Your Computer
Below shows the connection between the Cable Modem and your computer.
Connection
4
