DBE 4120
MPEG-2 Encoder System for Contribution
Configuration
guide
Issued by Network Products Marketing Department
GDBD4120 - 09/1999
THOMSON broadcast systems - All rights reserved
p.6 of 12
Management
The DBE 4120 management can be achieved locally through the front panel keypad and LC
Display, or remotely from the TBS supervision system.
The local management performed through the front panel menu-driven interface allows to select
the proper video input (SDI, PAL, etc) and the profile (4:2:2P@ML or MP@ML) to control the
transmission parameters and to recall, store or erase up to 12 pre-set configurations. Also
controlled through the encoder front panel interface are the basic parameters of the encoder
(alarm and bit rate monitoring, reboot, delay mode, scrambling mode) and that of the optional
system components (network interface)
For remote management two possibilities are offered, depending of the specific requirements:
either with the DBS 2930 software dedicated to MPEG-2 system, or with as an embedded
SNMP agent within a Network Management System environment.
User Interface
User selection with simple front panel interface
GUI on remote station
(Software unlocking of software options)
DBE 4120 Management Software: Example of service display
