USE
INSTALLATION
•
Plug the mains adaptor into the DC IN socket.
•
Insert the mains adaptor plug in the power connector at the back of the device.
•
The time will be shown at standby mode and TIME at 0.00.
SETTING THE TIME AND DATE
•
Press CLOCK SET button on at standby mode in 2 second to enter the clock setting
•
The hours display flashes the (clock set)
•
Turn the TUNING wheel to set the hours
•
Then press CLOCK SET to set a minutes
•
Repeat above steps to set a minutes / year / month / day
ALARM SETTING
ALARM 1 and ALARM 2 settings
The device has 2 different alarms that can be set on different modes (BUZZ, RADIO, WEEK and
WEEKEND).
•
Press ALARM 1 button on at standby mode in 2 second to enter the alarm setting
•
The hours display flashes
•
Turn the TUNING wheel to set the hours
•
Then press ALARM 1 to set a minutes
•
Turn the TUNING wheel to set the minutes
•
Press ALARM 1 to set a wake by Buzzer
“Zzz” or wake by Radio
ACTIVATING AND SELECTING ALARM1 OR ALARM2 MODE
•
Press
or
repeatedly to select the type of alarm function:
•
Press
to activate an alarm, the alarm time will be shown on display
•
With a
week icon the alarm rings
week date
•
Without a
week icon the alarm rings
everyday
DEACTIVATING THE ALARM
•
To deactivate alarm 1 or alarm 2, press
or
repeatedly until the alarm lights turn off.
ALARM REPEAT (SNOOZE)
•
Touch or pass your hand over the SNOOZE SENSOR proximity sensor to stop the alarm. The alarm will
sound every 9 minutes. The word SNOOZE flashes intermittently until the alarm sounds again.
