- EN 4 -
Power
CAUTION
• Risk of product damager! Make sure that the power voltage
corresponds to the voltage printed on the back label.
• Risk of electric shock! When you unplug the AC/DC adaptor
always pull the plug from the socket. Never pull the cord
• Before connecting the AC/DC adaptor, ensure you have
completed all other connections
Auto standby
When no music play from a connected device, the product automatically switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Power Supply by AC Adaptor
1. Connect the AC/DC adaptor to the DC JACK of the unit.
2.
Connect the AC/DC adaptor to a properly installed wall socket (AC 230 V/50 Hz).
Note:
Unplug the adaptor from the mains and the unit when the unit is not used for a long period of time.
The adapter should be installed near the equipment and should be easily accessible.
BATTERY BACK-UP
The back-up system ensures that the clock continues to function in the event of a power-cut.
1. Open the battery compartment on the back of the apparatus.
2.
Insert 2 LR03-type (AAA) 1.5 V batteries, polarity as indicated (+/-).
3. Close the battery compartment.
Battery power:
Be sure that the batteries are inserted correctly to avoid damage to the appliance. Always remove the
batteries when appliance will not be used for a long period of time, as this will cause leakage to the
batteries and subsequently damage to your set.
Use batteries of the same type. Never use different types of batteries together.
Do not throw the battery into the fire, or exposed to sunshine or the like.
If the liquid contained in the batteries comes in contact with eyes or skin, wash the area immediately
and carefully with clear water and consult a doctor.
RADIO OPERATION
For better reception, pull out the FM wire antenna and extend to its longest position
1. Press the POWER button to turn on the unit.
2. Press the MODE button repeatedly until the FM radio frequency appears on the display.
3. To search for the next /previous available radio station, press and hold the
or
button until
the displayed frequency starts running then release the button. (When a radio station is found, the
frequency on display will stop running and start playback automatically). To stop during searching,
press the
or
button again.
4. Repeat the same procedures until the desired radio station is found.
5. Adjust the volume to the desired level by pressing VOL+/AL 1 or VOL-/AL 2 button
6.
When you have finished listening, press and hold the POWER button to turn the unit to power off
(standby) mode.
