THOMSON BOT610MXD -, Manual, Page: 30 / 54

12
EN 4 / CARING FOR AND CLEANING YOUR APPLIANCE
• • Reassembling the door
(ALL
models)
Warning
Do not use abrasive cleaning
products or hard metallic scrapers for
cleaning the oven’s glass door, as they
could scuff the surface and cause the glass
to shatter.
- If necessary, remove the door’s inner glass
assembly. This assembly is composed of one
or two sheets of glass (depending on model),
each of which has a black rubber corner pad
(fig.4).
- After cleaning, reposition the four rubber
pads, taking care to follow the indications on
the glass:
* top left: L
* top right: R
Place your inner glass assembly in the door
so that L and R are located on the hinge side.
- If your oven is equipped with a single inner
sheet of glass, it must be located as close as
possible to the clipped glass.
- Clip in your last glass sheet by placing the
indication “PYROLYSIS” so that it faces you
(fig.5).
- Remove the red plastic stops.
Your appliance is again operational.
fig.4
CLAC
CLAC
fig.5
L L
R R
99644971_a_en.qxp 18/12/2007 15:01 Page 12