5
Installing the telephone base
The telephone base should be placed at least 1 meter away from other electrical appliances in order to avoid
interference. The handset exchanges radio signals with the telephone base. The strength of these signals
depends on the position of the base. You can obtain a stronger signal by placing the base higher.
Operating range of the handset
The operating range of your telephone is 300 meters outdoors without obstructions between the
telephone base and handset. Obstructions reduce the operating range. When the telephone base is
located indoors, while the handset is indoors or outdoors, the operating range is reduced to 50 meters.
Thick concrete walls reduce the operating range significantly.
Signal strength
When the handset is within the operating range of the telephone base,
appears on the screen.
flashes when the handset is out of range. Get closer to the telephone base to turn off this indicator.
Installing and charging the battery
1. Insert the plug of the supplied adapter to the back of the telephone base and the other end into an
electrical outlet.
2. Plug the telephone line cord to the back of the telephone base and the other end into a telephone wall
jack.
3. Insert the rechargeable Ni-MH batteries supplied into the handset by following the correct polarity as
indicated. Close the battery compartment.
4. Place the handset on the telephone base and let the batteries charge for 24 hours before using it for the
first time.
Charger (only for duo phone models TH-200DR2 / TH-200DRW2)
Telephone Jack
Adapter Jack
Adapter Jackk
