THOMSON 50WS94E, Service Manual

Page: 17 / 34

First issue 06 / 02 17
It could be necessary to change the zoom mode in order to
carry out some alignments of the set. Press the "format"
button of the remote control. The mode switches as shown in
the margin.
4/3
16/9 cinemarama
zoom
It is necessary to enter the Service Mode in order to carry out
alignment of the set. Most adjustments must be made with
the RCU.
• Using the remote control, press successively the zoom "-"
( -), exit, mute ( ) and zoom "-" ( -) buttons.
• The main service menu appears on the screen.
• Press the "menu" button to select the menu.
• Press the
/ buttons to select the menu line.
• Press the / buttons to make adjustments.
NB : the value of the adjustment is memorized automatically.
• To exit the service mode menu press successively, the
zoom "-" ( -), exit, mute ( ) and zoom "-" ( -) buttons
on the remote control.
• Enter the service mode and select the "usage time" menu,
• Using the remote control, press successively the mute
( ), , , and zoom "-" ( -) buttons.
ACCESSING SERVICE MODE
3
EXITING FROM SERVICE MODE
4
CLEARING THE USAGE TIME
2
NAVIGATION INSIDE THE SERVICE MODE
VE011
D CONTROL
NTSC
CONT -18
BRIGHT +15
U-COL 74
COLOR + 4
TINT -22
SERVICE MODE
Before entering the service mode, it could be necessary to
configure the plasma monitor in the On Screen menu.
• Using the remote control, press "menu" button.
• The "main" menu appears on the screen.
• Press the / buttons to select the "setup" line.
• The "setup" menu appears on the screen.
• Select the "color system" line.
• The "color system" menu appears on the screen.
• Press the / buttons to select the color standard.
1
ACCESSING COLOR STANDARD
MAIN MENU
OK SELECT EXIT EXIT
PICTURE
SOUND
SCREEN
PREFERENCES
OPTIONS
SETUP
SETUP
OK SELECT RETURN
MENU
FREQUENCY
MENU LANGUAGE
COLOR SYSTEM
COLOR SYSTEM
RETURN EXIT
COLOR SYSTEM
: 3.58NTSC
OK SELECT
OSD CONTROLS
ZOOM SEQUENCE
ADJUSTMENTS
ADJUSTMENTS NECESSARY AFTER REPLACEMENT OF MODULES:
- After replacement of MAIN module or Video module, perform the adjusments of "video screen position" and "DVD/HD/DTV
screen position".
- After replacement of POWER or PDP module , perform the adjusment of "+170V/+70V" and "+5V". When replacing PDP
module, also perform "screen position" adjustments and reset the "usage time" as shown below.
Replacing another module does not require further adjustment unless abnormal conditions are encountered.