First issue 03 / 01
21
It could be necessary to change the zoom mode in order to
carry out some alignments of the set. Press the "zoom"
button of the remote control. The mode switches as shown
below.
4/3
16/9
full screen
cinema
It is necessary to enter the Service Mode in order to carry out
alignment of the set. Most adjustments must be made with
the RCU.
• Using the remote control, press successively the timer (
),
OK, mute (
) and timer (
) buttons.
• The main service menu appears on the screen.
The Service Mode can also be accessed as follow:
• Press the stand-by button of the remote control,
• Switch the power OFF using the button of the keyboard
• While pressing the volume - button, switch the power ON.
• Press the "menu" button to select the menu.
• Press the
/
buttons to select the menu line.
• Press the
/
buttons to make adjustments.
NB : the value of the adjustment is memorized automatically.
• To exit the service mode menu press successively, the
timer (
), OK, mute (
) and timer (
) buttons on the
remote control.
ACCESSING SERVICE MODE
3
EXITING FROM SERVICE MODE
2
NAVIGATION INSIDE THE SERVICE MODE
VE200
D CONTROL
NTSC
CONT -18
BRIHT +15
U-COL 74
COLOR + 4
TINT -22
CBRI 120
SERVICE MODE
Before entering the service mode, it could be necessary to
configure the plasma monitor in the On Screen menu.
• Using the remote control, press "menu" button.
• The "main" menu appears on the screen.
• Press the
/
buttons to select the "setup" line.
• The "setup" menu appears on the screen.
• Select the "color standard" line.
• The "color standard" menu appears on the screen.
• Press the
/
buttons to select the color standard.
1
ACCESSING COLOR STANDARD
MAIN MENU
OK
SELECT
EXIT
MENU
PICTURE / AUDIO
SCREEN
OPTIONS
SETUP
SETUP
OK
SELECT
EXIT
MENU
FREQUENCY
RS 232 MODE
MENU LANGUAGE
COLOR STANDARD
RETURN
COLOR STANDARD
EXIT
MENU
COLOR STANDARD
: 3.58NTSC
RETURN
OSD CONTROLS
ZOOM SEQUENCE
ADJUSTMENTS
ADJUSTMENTS NECESSARY AFTER REPLACEMENT OF MODULES:
- After replacement of ANALOG module, perform the adjusments of "Video level" and "Video screen position".
- After replacement of VIDEO module, perform the adjusments of "video level" and "video screen position".
- After replacement of POWER or PDP module, perform the adjusment of "-180V and +180V" and "+5V".
Replacing another module does not require further adjustment unless abnormal conditions are encountered.
All manuals and user guides at all-guides.com
all-guides.com