EFC031E - IFC130
6
First issue 02 / 06
1.4.2 RGB
RGB Calibration for Standard monitor format (VESA)
- Connect R, G, B Hsync and Vsync with following standard into VGA BV300
connector:
- Exit temporary from Service Mode and select the VGA enter (press the magenta key on the RCU ”Text” to come
back at the service mode)
- Video pattern to calibrate
- Select ”Calibration” in ”Miscelaneous” Menu of the Service Mode and press on the RCU ”OK” key.
The screen is flashing few minutes and stable after few seconds.
Note:
The others items of the ”Miscellaneous” menu are described at § 4.
Signal
Value (Vp-p)
R (Red)
0.7
G (Green)
0.7
B (Blue)
0.7
Hsync.
2.4V
Vsync.
2.4V
Calibration Pattern 16 step Gray scale with no gamma
correction
Picture
Format
800x600@85Hz
