Factory Alignment Specification of normal SIACP
Page 7 of 19
dark environment keeping the probe(s) at 90+/-2° from the panel.
The result should measure up the relevant spec.
The alignment have to fulfill the requirements in Application Form.
Alignment FlowChart
Provide a test signal on the input and align the WB as described inside attached document
ensuring first that the BackLight value is matching below table:
MTK_EuroAlignmentF
lowchart.doc
2.4. High Pot. and Insulating Resistance Tests
At the end of the process, a High Pot. and an Insulating Resistance tests are required for
matching Safety Electrical requirements (ei: xxxx)
High Voltage Withstanding requirements
- “Voltage”
Ö
3500
VAC
- “Max Leakage Current”
Ö
10 mA
- “Test Time”
Ö
5 sec
Insulating Resistance requirements
- “Voltage”
Ö
DC500V
- “Threshold Max”
Ö
- “Threshold Min”
Ö
4M
¡
- “Test Time”
Ö
3 sec
3.
Factory default settings
Do the “Reset shop” before packing.The detail of reset shop follow OOB setting.
Summary of Contents for 24FS3246
Page 21: ...Factory Alignment Specification of normal SIACP Page 19 of 19...
Page 40: ......
