background image

1

1.

 

IMPORTANT SAFETY INSTRUCTIONS

Electrical energy  can  perform  many  useful  functions,  but  it  can  also  cause  personal  injuries  and  property damage  if
improperly  handled.  This  product  has  been  engineered  and  manufactured  with  the  highest  priority  on  safety.  But
IMPROPER  USE  CAN  RESULT  IN  POTENTIAL  ELECTRICAL  SHOCK  OR  FIRE  HAZARD.  In  order  to  prevent
potential  danger,  please  observe  the  following  instructions  when  installing,  operating  and  cleaning  the  product.  To

ensure your safety and prolong the service life of your LCD TV product, please read the following precautions carefully
before using the product.

1.Read instructions

—All operating instructions must be read and understood before the product is operated.

2.Retain instructions

—These safety and operating instructions must be kept in a safe place for future reference.

3.Observe warnings

—All warnings on the product and in the instructions must be observed closely.

4.Follow instructions

—All operating instructions must be followed.

5.Water  and  moisture

Do not use this product

near  water  -  for  example,  near  a  bathtub,  washbowl,
kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool, and the like.
Do  not  use  immediately  after  moving  from  a  low
temperature to high temperature environment, as this

causes condensation, which may result in fire, electric
shock, or other hazards.
Moisture in rooms where the set is installed should not
exceed 85% humidity
Leave  the  condensation  to  evaporate  before  turning
the TV on again.

6.Cleaning

— 

Unplug this product from the wall

outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
Clean the screen with a glass care cleaner and the rest

of the set with a soft cloth and neutral detergent.
Regularly dust the vents at the back and sides. Using
solvents, abrasive or alcohol based products risk
damaging the TV.

Caution 

: the screen of your LCD TV may be

damaged if it is cleaned with strong detergents, alcohol
or abrasive products.

7.Ventilation

—The vents and other openings in the

cabinet are designed for ventilation. Do not cover or
block these vents and openings since insufficient
ventilation can cause overheating and/or shorten the
life of the product. Do not place the product on a bed,

sofa, rug or other similar surface, since they can block
ventilation openings. This product is not designed for
built-in installation; do not place the product in an
enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s
instructions are followed.

8.Heat sources

—Keep the product away from heat

sources such as radiators, heaters, stoves and other
heat-generating products (including amplifiers).

The TV components are sensitive to heat. The
maximum ambient temperature should not exceed 35

0

celsius.

Summary of Contents for 20LB125B4
























Reviews: