Thompson DWG875 User Manual Download Page 24

Page: 24 / 89

Chapter 1: Connections and Setup

Illustrations contained in this document are for representation only.

Turning on the

Wireless Voice Gateway

After installing the

Wireless Voice Gateway and turn it on for the first time (and each time the modem is

reconnected to the power), it goes through several steps before it can be used. Each of these steps is

represented by a different pattern of flashing lights on the front of the modem.

Note: All indicators flash once before the initialization sequence.

If both DS and US LEDs are flashing sequentially, it means the Wireless Voice Gateway is automatically

updating its system software. Please wait for the lights to stop flashing. You cannot use your modem

during this time. Do not remove the power supply, switch off (on/off switch) or reset the Wireless Voice

Gateway during this process.

Summary of Contents for DWG875


























































































Search results

Summary of Contents for DWG875

Reviews:

Related manuals for DWG875

Brands by name

Popular brands

Thompson DWG875, User Manual

Search results

Summary of Contents for DWG875

Reviews:

Related manuals for DWG875

Brands by name

Popular brands