Installation and Operating Manual
Stratotimer ST3
REMOVAL / INSTALLATION
Revision: 1.00
12/06/2020
31-20-01
Page 401
REMOVAL / INSTALLATION
1. Removal
1.1 References
REFERENCE
ITEM
Aircraft Maintenance Manual (AMM)
Chapter 24, Electrical Power
1.2 Special Tools and Equipment
REFERENCE
ITEM
Local supply
Protective caps for electrical connectors
1.3 Consumable Materials
None
1.4 Expendable Parts
None
1.5 Preparation
(1) Make sure that the work area is clean and clear of unwanted parts and materials.
(2) Open and tag the applicable circuit breaker to disconnect electrical power to the
Stratotimer ST3 (ref. AMM, Chapter 24).
1.6 Removal
Refer to Figure 401.
(1) Loosen the two adjusting screws (3) that hold the Stratotimer ST3 (1) in the clamp (2).
NOTE: The adjusting screws (3) are larger than the mounting screws (4). Do not
loosen the mounting screws (4).
(2) Carefully pull the Stratotimer ST3 (1) from the aircraft instrument panel to get access
to the electrical connector.
(3) Disconnect the electrical connector and remove the Stratotimer ST3 (1).
(4) Put protective caps on the electrical connectors of the aircraft and the Stratotimer ST3
(1).
1.7 Close-up
(1) Remove all tools and materials and clean the work area.
Summary of Contents for STRATOTIMER ST3
Page 3: ......
