Thomasville Summer Silhouette 12265-002/012, Assembly Instructions, Page: 2 / 2

Page 2 of 2
Assembly Instructions Summer Silhouette
TM
Side Table Model # 12265-002/012
1. Carefully remove the glass top (A1) from the tabletop. Place the table
rim (A2) upside down on a flat soft, non-abrasive surface. Align the holes
of the table legs (B) with the holes in the table rim. Attach each leg (B)
using the screws (C) and washers (D) as indicated. When attaching each
leg, insert and start all four screws before completely tightening the
screws. Once all four screws are inserted, tighten each screw using the
hex key (F). After checking to make sure all screws are securely tightened,
install the screw cover caps (E). See Figure 1 .
Figure 1
2. Carefully turn the table over into the upright position and place the glass top (A1) into the
recessed opening in the table rim. See Figure 2 .
CAUTION
ƒ
As a safety precaution, tempered glass was used for the top.
ƒ Handle and use the glass top with care.
ƒ Do not put hot items directly on the glass top.
Note: Please keep the touch-up paint (G) for future use on your table if needed.
Figure 2
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !