8
Assembly Instructions
NOTE
: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all bolts. This will make the assembly easier.
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Attach the Upper Back Stretcher (E) to the Right Side Frame (C) with two 16 mm Bolts (1), two Lock
Washers (2) and two Flat Washers (3). DO NOT fully tighten the Bolts in this step.
3.
Attach the Upper Front Stretcher (D) to the Right Side Frame (C) using two 16 mm Bolts (1), four
Washers (2 and 3) as shown.
The metal tabs face upward when
the unit is turned upright.
E
E
C
3
2
1
C
3
1
2
D
C
D
C