7
Large Drawer Assembling
NOTE:
Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Securely screw the Small Cam Bolts (8) into the designated small holes on both Large and Small Drawer
Fronts (R and X) using a Phillips screwdriver.
DO NOT
over tighten the cam bolts.
3.
Align and attach the Large Drawer Side Panels (T and U) to the Large Drawer Front (R) by engaging 4
Small Cam Locks (7) (Refer to page 3 on Cam Lock system operation supplement).
R
X
X
8
7
7
R
T
U