2021-04
Folding closed
Bring the reclining seat into the horizontal position and unlock the locking lever on both sides of the chassis (pull
upwards) while pressing the push bar down (Fig. 13). Then bring the backrest into the lying position, remove the knee
angle, flip up the footplate, and swivel the footrest as far forward as possible under the seat unit (Fig. 14). To secure the
rehab stroller in the folded state, rotate the red locking pin on the right side of the chassis by 90° (Fig. 10). Lift the push
handle slightly until the locking pin of the lock for folding engages.
Caution: Hold onto the frame; do not drop it.
Note regarding folding: When folding the seat closed, always ensure that the seat position is horizontal.
Transport
The EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit, together with the A-Chassis Advantage, can be
folded up for transport in a vehicle trunk. Heed the instructions for folding the rehab wagon and use the lock for folding
to avoid unintentional unfolding (Fig. 10).
The seat unit and chassis can be separated so that their weights can be lifted separately. In this regard, please refer to
the instructions for removing the seat unit.
To ensure the simplest possible handling, use one hand to grab the seat unit on the handle on the back rest, to which
the release lever for the seat tilting is also attached (Fig. 6). With the other hand, grab the front edge of the seat. The
chassis can be lifted by holding the frame on the sides or the bent pipe which connects the left and right front frames.
Swivel seat function
Note regarding safety: Each time that the seat is modified, ensure that the seat unit is properly and securely locked be-
fore placing your child into the rehab stroller.
Secure the chassis from rolling away using the parking brake (Fig. 15). Actuate the release lever on the back of the EASyS
Advantage / EASyS Advantage S / EASyS Modular S seat unit and pull the seat unit upwards out of the chassis (Fig. 1).
Make sure that the buttons on the sides of the seat unit between the folding joint and the connecting strap of the rear
frame and the sliding support are properly threaded through (Fig. 7) and that the release lever remains actuated while
removing the seat unit.
Now the seat unit can be placed facing the rear. Activate the release lever on the backrest and insert the seat unit into
the chassis from above (Fig. 6). Make sure that the buttons on the sides of the seat unit between the folding joint and the
connecting strap of the rear frame and the sliding support are properly threaded through (Fig. 7) and that the release le-
ver remains actuated while removing the seat unit. Now guide the buttons on the sides of the seat unit into the receiving
slots on the sides of the chassis (Fig. 8) and let the seat unit slide into position (Fig. 9). When you release the trigger, the
seat unit engages into the closest position of the hole matrix.
Caution: Always ensure that the locking pins on both sides of the seat unit engage firmly into a hole in the hole matrix.
Foot brake function
Activation: Place your foot on the brake lever and push it down (Fig. 15).
Release: Place your foot under the brake lever and push it up (Fig. 16).
Parking brake function for the front wheels
Activation: Position the front wheel so that it is straight and allow the braking pin to engage (makes an audible “click”).
Release: Pull the braking pin out and fasten it by rotating it 90° (Fig. 17).
Instructions for Use – A-Chassis Advantage
23
