Thomas SAF-T-LINER C2, Maintenance Manual

Page: 28 / 176

NOTE: The drive motor supply cables are bolted
inside the motor; they do not plug in.
3. Visually inspect the drive motor supply cables
where they connect to the motor and ensure that
they are properly connected;
Do not touch the
cables. See Fig. 2 .
4. Remove the chocks from the tires.
08–03 Transmission
Inspection, Electric
Vehicle
1. Park the vehicle on a level surface, shut down
the engine, and set the parking brake. Chock the
rear tires.
2. Inspect the transmission electrical connection
and ensure that the connector is properly seated,
as shown in
Fig. 3 .
3. Inspect the transmission pneumatic connections.
See
Fig. 4 . Tighten the connections as needed if
they are loose.
4. Remove the chocks from the tires.
f080226 05/29/2020
1
2
1. Drive Motor Supply High Voltage Cables
2. High Voltage Power Supply Cables
Fig. 2, High Voltage Cables
f080225 05/27/2020
1
1. Transmission Electrical Connection
Fig. 3, Transmission Electrical Connection
Electric Drive
08
Saf-T-Liner C2 School Bus Maintenance Manual, July 2020
08/2