- Version du 11/06/2020 -
Euromel Extractor : User’s Guide
7/8
Problem
Possible solution
The machine does not start
- Check that the unit is connected to the power supply.
- Check the power supply (power failure).
- Check that the safety head (2) is not dirty. If it is, remove it
and soak it in hot water.
- Check that the potentiometer (8) is not set to 0.
- Check that the circuit breaker button inside the housing
(3) is set to ON.
- Check that the "Low speed" and "High speed" timers are
not both set to 0.
- Check that the arrow (B) on the lid lock is in the "padlock
closed" position.
The device vibrates too much
-Check that the frames are correctly positioned and
balanced.
- If necessary, take them out and re-balance the assembly.
The machine is having problems
running
- Check that the honey is well evacuated from the
extractor.
- Check that the bearings and the topping are in good
condition and lubricate them.
- Check that the motor shaft is properly engaged in the
cage shaft. If necessary, tighten the nut located under the
cage.
Frequent Questions
CAUTION
: Unplug the machine before any operation.
