6
Indoor
Speaker
25701 Science Park Drive
Cleveland, Ohio 44122
www.lamson-home.com
Made in China
051205 IS183
LIMITED W
ARRANTY
The pr
oduct you have purchased is guaranteed against defects in workmanship for the period
stated on the package. Warranties implied by law are subject to the same time period limitation.
Some states do not allow limitations on how long an implied warranty lasts, so this time limitation
may not apply to you.
If the product fails due to a manufacturing defect during normal use, return the product and dated
sales receipt to the store where purchased for replacement OR send the product and the dated
sales receipt to:
Lamson & Sessions
25701 Science Park Drive
Cleveland, OH 44122 USA
Attn: LHP Customer Service
Not Covered
- Batteries, light bulbs, and other expendable items ar
e not covered by this warranty.
Repair service, adjustment and calibration due to misuse, abuse or negligence are not covered by
this warranty. Unauthorized service or modification of the product or of any furnished components
will void this warranty in its entirety. This warranty does not include reimbursement for
inconvenience, installation, set-up time, loss of use, postage, unauthorized service, or other
products used in conjunction with, but are not supplied by, Lamson & Sessions.
All requests for replacement must include a dated sales receipt (copies accepted). LAMSON &
SESSIONS IS NOT LIABLE FOR LOST PROFITS, INDIRECT, SPECIAL, EXEMPLARY, INCIDENTAL OR
CONSEQUENTIAL DAMAGES INCLUDING WITHOUT LIMITATION ANY SUCH DAMAGES DUE TO
IMPROPER WIRING OR MISUSE OF THE PRODUCT. As some states do not allow the exclusion or
limitation of incidental or consequential damages, the above limitation and exclusion may not
apply to you.
Master Speaker
Yellow
Wires
Orange
Wires
DH1201/DH1202
Pushbutton
Door
Strike
Wires
DH970
Door Strike
Figur
e 7
Figure 8
An optional Electric Door Strike featur
e can be added to the Intercom system.
This feature requires adding one DH1201 or DH1202 pushbutton and one
DH970 Door Strike–both sold separately.
Pushbutton Installation
1.
Remove insert panel from Indoor Speaker. See Figure 7.
2. Insert the DH1201 or DH1202 through the pushbutton hole in the Indoor Speaker.
Note:
Do not use lighted buttons.
W
iring Connections
1.
Run standard bell/chime wire from Door Strike location to Indoor Speaker
location. See Figure 8.
2. Connect the two yellow wires from the Indoor Speaker’s PC board to the
pushbutton terminals.
3. Connect the Door Strike wires to the two orange wires on the Indoor
Speaker’s PC board.
Electric Door Strike Mounting
1.
Mount Door Strike at the door latch according to the instructions included
with the Door Strike.
OPTIONAL ELECTRIC DOOR STRIKE WIRING
AND PUSHBUTTON INSTALLATION
Remove
Insert Panel
