thomann xBrick Quad, User Manual

Page: 47 / 64

7.5 Operating mode ‘Slave’
This setting is only relevant if the device is working as Slave in a Master / Slave configuration
and is not controlled via DMX. To activate the operating mode, repeatedly press [Mode] until
the display shows ‘Slave’ .
7.6 Operating mode ‘Static Colour’
This setting is only relevant if the device is working in Stand Alone mode and is not controlled
via DMX. In this mode you have the option to select a solid colour for continuous operation
and to set the flash frequency for all LEDs.
1.
Press [Mode] , use [Up] and [Down] to select the menu option ‘Static Colour Mode’ and
confirm with [Setup] .
2. Use [Up] and [Down] to set the intensity for the red colour in a range from ‘000’ … ‘255’
(bright … dark) and confirm with [Setup] .
3. Use [Up] and [Down] to set the intensity for the green colour in a range from
‘000’ … ‘255’ (bright … dark) and confirm with [Setup] .
Operating
xBrick Quad 16
×
8W RGBW
47