thomann Varytec Star Shot Laser FX, User Manual

Page: 18 / 40

In this menu you can adjust the colour of the LEDs for the wash effect. In addition, a
stroboscope effect can be activated for these LEDs.
Press
[MENU] to open the main menu.
Press repeatedly [MENU] or [UP] and [DOWN] to select the menu item ‘CoL’ and con‐
firm with [ENTER] . The display shows ‘Colo’ ; confirm with [ENTER] .
Change the currently displayed parameter with [UP] and [DOWN] and confirm with
[ENTER] . To return to the main menu without making changes, press [MENU] .
Parameter Meaning
‘r.000’ … ‘r.255’ Intensity red
‘G.000’ … ‘G.255’ Intensity green
‘b.000’ … ‘b.255’ Intensity blue
‘u.000’ … ‘u.255’ Intensity UV
‘S.0’ … ‘S.100’ Stroboscope effect, increasing speed
In this mode the device is controlled via a DMX controller.
Press
[MENU] to open the main menu.
Press repeatedly [MENU] or [UP] and [DOWN] to select the menu item ‘dNH’ and con‐
firm with [ENTER] .
The display shows ‘d1’ ; confirm with [ENTER] . Use [UP] and [DOWN] to select a DMX
mode: 3-channel ( ‘3Ch’ ), 5-channel ( ‘5Ch’ ), 11-channel ( ‘11Ch’ ) or 28-channel
( ‘28Ch’ ) and confirm with [ENTER] . Now you can set the number of the first DMX
channel to be used by the device (DMX address). Use [UP] and [DOWN] to select a
value between 1 and 512 (the display shows ‘d001’ … ‘d512’ ). Confirm with [ENTER] .
Make sure that this number matches the configuration of your DMX controller. The
following table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
3-channel 510
5-channel 508
11-channel 502
28-channel 485
To return to the main menu without making changes, press [MENU] .
Menu colour
Operating mode DMX
Operating
LED effect
18