thomann Varytec LED Studio Par Rookie COB 100W, User Manual

Page: 29 / 48

Press [MENU] repeatedly until the display shows ‘CF01’ to select a Fade programme. Use the
arrow buttons to select a value between 01 and 99 (display shows ‘CF01’ … ‘CF99’ ). When the
display shows the desired value confirm the selection with [ENTER] .
This setting is only relevant if the device is not controlled via DMX.
Press [MENU] repeatedly until the display shows ‘St01’ to set the strobe speed. Use the arrow
buttons to select a value between 01 and 99 (display shows ‘St01’ … ‘St99’ ). When the display
shows the desired value confirm the selection with [ENTER] .
This setting is only relevant if the device is not controlled via DMX.
Press [MENU] repeatedly until the display shows ‘SEn1’ to set the microphone sensitivity for
sound control. Use the arrow buttons to select a value between 1 (low) and 9 (high) (display
shows ‘SEn1’ … ‘SEn9’ ). When the display shows the desired value confirm the selection with
[ENTER] .
This setting is only relevant if the device is not controlled via DMX.
Fade programmes
Stroboscope speed
Sound control
Operating
LED Studio Par Rookie COB 100W
29
LED PAR