7.4 Settings
Use the
‘Setting’
menu to adjust the device parameters.
1.
Press
[SET]
to activate the main menu.
2.
Press
[UP]
or
[DOWN]
until the display shows
‘Setting’
and confirm the selec‐
tion with
[SET]
.
3.
Press
[UP]
or
[DOWN]
to select the desired submenu or the desired value and
confirm the selection with
[SET]
.
The following sub menus are available:
Menu level
2
Menu level
3
Menu level 4 Description
‘Pan Reverse’ ‘YES’
Pan reversal in opposite direc‐
tion of rotation is activated.
‘NO’
Pan reversal in normal direc‐
tion of rotation is activated.
‘Tilt Reverse’
‘YES’
Tilt reversal in opposite direc‐
tion of rotation is activated.
‘NO’
Tilt reversal in normal direc‐
tion of rotation is activated.
‘Pan Limit’
‘Starting
point’
‘0…539’
Sets the starting point of the
rotation angle.
‘Ending
point’
‘1…540’
Sets the ending point of the
rotation angle.
‘Tilt Limit’
‘Starting
point’
‘0…239’
Sets the starting point of the
tilt angle.
‘Ending
point’
‘1…240’
Sets the ending point of the
tilt angle.
‘Home
Position’
Setting the start parameters
Detailed information about
this menu item can be found
under
Ä
‘Setting the start
parameters’ on page 24
.
‘DMX Fail’
Behaviour on DMX control failure
‘Hold’
If the DMX control fails, the
last setting is retained.
‘Blackout’
If the DMX control fails, the
device is blacked out.
‘Auto Mode’
If the DMX control fails, the
"Automatic programmes"
mode is activated.
Operating
Hero Wash 300 FC
21
moving head