thomann Varytec BAT.PAR 6 RGBUV, User Manual

Page: 32 / 60

7 Operating
7.1 Starting the device
Turn on the power using the main switch. The display shows the current operation mode.
7.2 Operating on the unit
Wait about 15 seconds until the display turns dark after confirming the last change of the set‐
tings. Then the settings are saved.
Press [MENU] , [UP] or [DOWN] repeatedly until the display shows ‘Addr’ . Confirm with [ENTER] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [UP] and [DOWN] to select a value between 1 and 512 (display shows ‘A001’ … ‘A512’ ).
Confirm with [ENTER] .
Make sure that this number matches the configuration of your DMX controller.
DMX address
Operating
32
BAT.PAR 6 RGBWA BAT.PAR 6 RGBUV
LED spotlight