thomann Varytec BAT.PAR 6 RGBUV, User Manual

Page: 21 / 60

Push the lock of the battery holder towards the centre of the housing and pull out the battery
holder like a drawer. Insert the batteries. Check for correct polarity as shown on the back of the
remote control. Slide the battery holder back into the remote until it clicks into place.
When shipping, the batteries are already installed in the remote and protected against dis‐
charge by a transparent plastic film. Remove the plastic film before initial use.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Inserting batteries into the
remote
Installation
BAT.PAR 6 RGBWA BAT.PAR 6 RGBUV
21
LED spotlight