thomann the t.bone GigA Pro Wind Set, User Manual

Page: 45 / 64

3.
Press the jog wheel to close the display.
4.
Turn the jog wheel left or right to select the menu item ‘Exit&Save’ .
5.
Press the jog wheel to return to the home screen.
1.
Turn on the transmitter and point the infrared sensor of the transmitter directly at the
[ACT] button of the receiver.
2.
Press [ACT] .
ð
The message ‘ACT...’ in the display indicates that the synchronization is running.
3.
After successful synchronization, the display appears in the default state. The battery
status of the transmitter with which you just synchronized is now displayed here.
If the synchronization has failed, the message
‘FAIL’ appears. In this case, hold the trans‐
mitter closer to the receiver and restart the synchronization.
Synchronizing transmitter and
receiver
Operating
GigA Pro Wind Set
45