10 Mains connector with fuse holder
Connect the supplied power cord here and supply the device with mains voltage.
11 ERP ON | OFF
On / off switch for standby function. If the standby function is enabled, the device
automatically switches to standby mode after 20 minutes without any input signal.
12 / 13 Speaker outputs CH-1/2
Connect speakers to the speaker outputs of channel 1 and 2 using SPK cables
(wiring = 1+ 2+ 1– 2–).
14 / 15 Speaker terminals CH-1/2
You can connect the speakers either with cable lugs or bare wire to the cable termi‐
nals on the rear panel.
Connections and operating elements
S-75 MK II, S-100 MK II, S-150 MK II
19
