6
Operation
Connect microphones to the low-impedance XLR inputs (MIC, 3) or the high-impedance 1/4"
inputs (MIC/LINE, 4).
Connect musical instruments to the 1/4" inputs (MIC/LINE, 4).
Connect the speaker boxes via the supplied speaker cables to the ‘SPEAKER OUT’ sockets (19)
on the rear panel of the unit.
Use the RCA sockets ‘TAPE PLAY’ (20) on the rear panel of the unit to connect CD player or tape
devices for additional inputs.
Use the RCA sockets ‘TAPE REC’ (21) on the rear panel of the unit to connect recording devices
or the like.
The unbalanced ‘MAIN OUT’ socket (15) provides the master signal with line level.
The unbalanced ‘REVERB OUT’ socket (14) provides the combined effect signal that is tapped
from the channels with the
[Reverb]
controls (16). Here you can connect an external effects
device, which then takes over the signal processing instead of the built-in reverb function.
Use the unbalanced ‘AUX IN’ socket (13) for additional inputs, or to lead the processed signal
from an external effects device back into the signal path of the power mixer.
Wiring
Operation
PA 4080 Package
23
