thomann the box pro DSP 108, User Manual, Page: 23 / 40

Press [MASTER VOL | PUSH FOR DSP] four times during operation to call up the unit's DSP func‐
tion ‘High Pass Filter’ . ‘80 Hz’ (frequency attenuation below 80 Hz) appears in the display. Press
again [MASTER VOL | PUSH FOR DSP] to enable this function. Or turn the knob to select another
cut-off frequency ‘100 Hz’ , ‘120 Hz’ or ‘150 Hz’ and press [MASTER VOL | PUSH FOR DSP] to call it
up.
Press [MASTER | PUSH FOR DSP] to call up the main menu and turn [MASTER | PUSH FOR DSP]
until the display shows the DSP function ‘LED MODE’ . Press [MASTER | PUSH FOR DSP] to enable
the function. Turn [MASTER | PUSH FOR DSP] until the display shows ‘OFF’ (LED indicator off),
‘ON’ (LED indicator permanently on) or ‘LIMITER’ (LED indicator blinks when the limiter is ena‐
bled) and press [MASTER | PUSH FOR DSP] to confirm.
Low-Cut filter
Setting the LED mode
DSP functions
DSP 108, 110, 112, 115
23