5
1. CLIP
Clipping indicator. When this indicator is flashing, please reduce the
volume to assure safe operation with clear audio output.
2. LOW CUT @ 120 Hz
Press this button to activate a low frequency attenuation below 120 Hz
to reduce stage rumble noises and thereby protect the woofer.
3. VOLUME
Volume control. Increase the volume by rotating clockwise and
decrease the volume by rotating counter-clockwise. Attention: First
please adjust the volume to minimum before switching the unit on and
transmitting signals. Then adjust to appropriate volume.
4. LINE
Line input signal presence indicator.
5. LINE/MIC
Level adjust switch for the input. For safety reasons this switch
needs to be pressed deeply with a pen-like opject, until it clicks into
place. Press down this switch, when connecting audio signals with
microphone level to the INPUT socket. Release the switch, when
connecting line level signals.
6. 115V/230V
Mains voltage selector. Make sure this selector is set correctly for the
supply voltage at the place of operation.
7. BASS
Turn it clockwise to increase the low frequencies. Turn it
counterclockwise to attenuate the low frequencies.
8. TREBLE
Turn it clockwise to increase the high frequencies. Turn it
counterclockwise to attenuate high frequencies.
9. MIC
Microphone input signal presence indicator.
10. OUTPUT socket
Line output. Connect here additional active speaker boxes.
11. INPUT socket
Connect the input device here.
12. Power supply input
Make sure that the voltage selector
y
is set correctly for the supply