thomann t.bone GigA Pro Cam Set HT, User Manual

Page: 30 / 48

1.
Enter the parameter setup mode and press [/MODE] until the display shows ‘RF
POWER’ .
2.
Press [/ACT/SET] once.
ð
The cursor is blinking.
3.
During blinking, press [/ACT/SET] to choose between high ( ‘HIGH’ ) or low ( ‘LOW’ ) level.
4.
Press [/MODE] to save the value.
5.
Press [/ACT/SET] to transmit the new settings to the paired receiver.
Adjusting radio signal level
Operating
wireless system
30