thomann t.bone free solo PT, User Manual

Page: 34 / 56

6 Operating
6.1 Receiver
1.
Press [SET] .
ð
The GP [ display] flashes.
2. Use the arrow buttons to select the frequency group.
Press
[SET] to confirm the selection.
ð
The CH [ display] flashes.
3.
Use the arrow keys to select a channel within the set frequency group.
If you have selected frequency group
‘U’ , you can use the arrow keys to set the fre‐
quency directly in 25-kHz increments. First set the value before the decimal point, then
press [SET] and set the value after the decimal point.
Press [SET] to confirm the selection.
ð
The display shows that the receiver is being adjusted to the new frequency. After a
few seconds, the display shows the normal sate again.
Selecting frequency
Operating
wireless system
34