thomann swissonic sa 125 cd, User Manual

Page: 25 / 32

22 Selector switch for the supply voltage of the device (115 V or 230 V, factory-set value).
23 Plug for mains cable with fuse holder.
24 INPUT 1 – 4
Signal inputs 1 to 4 (lockable combo XLR/jack sockets) with pertinent selector switches for input sensitivity (line /
microphone) and phantom powering.
25 MUTE SEN.
Priority control. This setting controls to which extent the volume levels of the other channels are decreased when a
microphone signal (via INPUT 1) or a telephone signal (via TEL.INPUT) is output. Use a suitable screwdriver to turn the
control knob into the desired position.
26 TEL. LEVEL
Volume control for the telephone input of the mixer amplifier.
27 Right screw terminal strip: Monitor output and telephone input, see
Ä Chapter 4.2 ‘Screw terminal strips’ on page 17 .
28 MOH LEVEL
Volume control for the monitor output and the AUX input of the mixer amplifier.
Connectors and controls
SA 125 CD
25