thomann STARVILLE PAR56 10MM UV LED-PAR, User Manual

Page: 29 / 44

Press [M] . Press one of the arrow keys repeatedly until the display shows ‘SET’ . Press [OK] . Press
one of the arrow keys repeatedly until the display shows ‘SPEER’ . Press [OK] . Now you can set
the programme speed for the preprogrammed automatic shows. Use the arrow keys to select
a value between 1 and 255 (the display shows ‘T001’ … ‘T255’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value, press [OK] to confirm the selection. Then press [M] to return to the higher menu
level. To return to the higher menu level without changes, press [M] .
Press [M] . Press one of the arrow keys repeatedly until the display shows ‘SET’ . Press [OK] . Press
one of the arrow keys repeatedly until the display shows ‘STRO’ . Press [OK] . Now you can set
the strobe effect speed. Use the arrow keys to select a value between 0 and 24 (the display
shows ‘S-00’ … ‘S-24’ ).
This setting is only relevant if the device is not controlled via DMX. When the display shows the
desired value, press [OK] to confirm the selection. Then press [M] to return to the higher menu
level. To return to the higher menu level without changes, press [M] .
Programme speed
Strobe effect speed
Operation
PAR56 10MM UV
29