thomann STARIRVILLE MH-110 Page 8 User Manual Download

Page: 8 / 52

1.3 Symbols and signal words

In this section you will find an overview of the meaning of symbols and signal words that are

used in this manual.

Signal word

Meaning

DANGER!

This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

CAUTION!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in minor injury if it

is not avoided.

NOTICE!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

General notes

moving head

Summary of Contents for STARIRVILLE MH-110





















































Search results

Summary of Contents for STARIRVILLE MH-110

Reviews:

Related manuals for STARIRVILLE MH-110

Brands by name

Popular brands

thomann STARIRVILLE MH-110, User Manual

Search results

Summary of Contents for STARIRVILLE MH-110

Reviews:

Related manuals for STARIRVILLE MH-110

Brands by name

Popular brands