If you do not press any button for about 8 seconds, the display will turn off. The set values are
retained even when the device is disconnected from the mains power supply.
1.
Press
[MENU]
and then
[MENU]
again. The display shows
‘Addr’
. Confirm with
[ENTER]
.
2.
Use | to select the desired AMD address between 1 and 512. Make sure that this
number matches the configuration of your DMX controller.
3.
Press
[ENTER]
to accept the selection.
This setting is only relevant when the device is controlled via DMX.
When the DMX mode is active, a dot flashes in the second digit of the display.
DMX address
Operating
Z100M Par 64 LED 3000K 100W CW/WW/A
29
Summary of Contents for Stairville Z100M Par 64 LED 3000K 100W
