thomann STAIRVILLE Wild Wash Pro 648 RGBW User Manual Download Page 88

Page: 88 / 92

Symptom

Remedy

The unit does not work, no light,

the display is dark

Check the mains connection and the main fuse.

Apparently no function despite

proper power supply

Check if the unit is in DMX mode or in ‘slave’ mode. If so,

check the unit in another mode.

No response to the DMX con‐

troller

1. Check whether the DMX controller is switched on.

Check the DMX connectors and cables for proper con‐

nection.

2. Check the address settings and the DMX polarity.

3. Try using another DMX controller.

4. Check whether the DMX cables run near or parallel to

high-voltage cables that may cause damage or interfer‐

ence to a DMX interface circuit.

If the procedures recommended above do not succeed, please contact our Service Center. You

can find the contact information at

www.thomann.de

Troubleshooting

LED spotlight

Summary of Contents for STAIRVILLE Wild Wash Pro 648 RGBW





























































































Search results

Summary of Contents for STAIRVILLE Wild Wash Pro 648 RGBW

Reviews:

Related manuals for STAIRVILLE Wild Wash Pro 648 RGBW

Brands by name

Popular brands

thomann STAIRVILLE Wild Wash Pro 648 RGBW, User Manual

Search results

Summary of Contents for STAIRVILLE Wild Wash Pro 648 RGBW

Reviews:

Related manuals for STAIRVILLE Wild Wash Pro 648 RGBW

Brands by name

Popular brands