thomann STAIRVILLE Stage Quad LED Bundle RGBW User Manual Download Page 9

Page: 9 / 64

Signal word

Meaning

DANGER!

This combination of symbol and signal word indicates an

immediate dangerous situation that will result in death or

serious injury if it is not avoided.

WARNING!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in death or serious

injury if it is not avoided.

NOTICE!

This combination of symbol and signal word indicates a pos‐

sible dangerous situation that can result in material and

environmental damage if it is not avoided.

Warning signs

Type of danger

Warning – high-voltage.

Warning – dangerous optical radiation.

General information

Stage Quad LED Bundle RGBW / RGBWW

Summary of Contents for STAIRVILLE Stage Quad LED Bundle RGBW

































































Search results

Summary of Contents for STAIRVILLE Stage Quad LED Bundle RGBW

Reviews:

Related manuals for STAIRVILLE Stage Quad LED Bundle RGBW

Brands by name

Popular brands

thomann STAIRVILLE Stage Quad LED Bundle RGBW, User Manual

Search results

Summary of Contents for STAIRVILLE Stage Quad LED Bundle RGBW

Reviews:

Related manuals for STAIRVILLE Stage Quad LED Bundle RGBW

Brands by name

Popular brands