Press the
[M]
button. Press one of the arrow keys repeatedly until the display shows
‘DMX’
.
Press the
[OK]
button. Now you can set the number of the first DMX channel to be used by the
device (DMX address). Use the arrow keys to select a value between 1 and 512 (the display
shows
‘A001’
…
‘A512’
).
When the display shows the desired value, press the
[OK]
button to confirm the selection. Then
press
[M]
to return to the higher menu level. To return to the higher menu level without
changes, press the
[M]
button.
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the different DMX modes.
Mode
Highest possible DMX address
4-channel
509
6-channel
507
8-channel
505
DMX address
Operation
LED PAR
28
Summary of Contents for STAIRVILLE Stage-PAR CX-3 RGBW 18x8W
